Lock and key issues can be stressful β especially lockouts. This guide walks you through the most common situations, starting with the most urgent.
π© Need a repair?
Submit a Maintenance Request βπ Table of Contents
- Emergency Locked out of the home
- Security Break-in, tampering, or lost/compromised key
- Key issue Key is stiff or hard to turn
- Key issue Key inserts but won’t turn
- Key issue Broken key stuck in lock
- Door issue Door won’t latch or stay closed
- Door issue Deadbolt won’t engage
- Sliding door Sliding door hard to open or lock not engaging
- Window Window lock issues
- Garage Garage door won’t close
π Locked Out of the Home
- Business hours (MonβFri) Call our office immediately: 571-946-6021. We will assist as quickly as possible and may coordinate a locksmith on your behalf.
- After hours / weekends Contact a licensed local locksmith. Ask for an upfront price quote before any work. Verify their license/ID when they arrive. The cost is your responsibility per your lease. Call us the next business day to report the lockout β if a lock was changed, we’ll need a copy of the new key.
Do NOT attempt to force open a door or window. You will be responsible for any resulting damage, and it may create a security vulnerability.
π‘οΈ Security Concern (Break-In, Tampering, or Key Compromise)
- Signs of break-in Pry marks, damaged door frames, or tampered locks β do not enter if someone may still be inside. Call 911 first. Once safe, call police to file a report, then call 571-946-6021 and submit a maintenance request.
- Lost key Report immediately: call 571-946-6021 or submit a maintenance request. A re-key may be required (may be at your cost per lease). Do not distribute key copies without written permission. Do not replace locks yourself.
- Concern about previous tenant All locks are re-keyed between tenancies. If you have concerns, contact us at 571-946-6021.
π Stiff or Difficult Lock
- Apply graphite lubricant (powder, at hardware stores). Puff into the keyhole, work the key in and out. Do not use WD-40 β it attracts dust and gums up the mechanism.
- Rub a pencil tip (graphite) along the key’s teeth, insert, and work it back and forth.
- Check door alignment β if the door has shifted, the lock bolt may be binding against the strike plate. β See Door Not Latching.
- β Lubrication doesn’t help β submit a maintenance request.
ποΈ Key Won’t Turn in Lock
- Confirm it’s the correct key β easy to try the wrong one on a full keyring.
- Apply graphite lubricant as described above.
- Lift up on the door handle while turning (for sagging door) or push the door slightly inward β door weight pressing on the latch can make turning harder.
- If frozen (cold weather): use commercial lock de-icer or warm the key with your hands before inserting. Do not use a lighter to heat the key.
- β Key still won’t turn β submit a maintenance request.
ποΈ Broken Key in Lock
Do not insert the other piece to push it out β this pushes the fragment deeper. Do not insert random tools β you may damage the mechanism.
- If part of the key is protruding: grip firmly with needle-nose pliers and pull straight out.
- Try a broken key extractor kit (inexpensive, at hardware stores): insert hook, engage the key’s teeth, pull straight out.
- β Can’t extract it β call a licensed locksmith or submit a maintenance request.
πͺ Door Not Latching Properly
- Close the door slowly β watch where the latch contacts the strike plate. Too high, too low, or off to the side?
- Look at the hinges. Loose hinges let the door sag. Do not remove screws or repair stripped screw holes. Report a sagging door or loose hinges. Your own checks are limited to looking, cleaning, and using a lubricant that is compatible with the lock or hardware.
- Door swollen from humidity? β Consistently sticking? Submit a maintenance request β door may need planing.
- If an exterior door cannot latch or lock, report it right away and call 571-946-6021. Any temporary measure must still let everyone leave quickly in an emergency, so do not use bars, wedges, or anything that needs a key or tool to open from inside.
π Deadbolt Not Engaging
- Test with door open β does the bolt extend/retract freely? If yes, the issue is alignment with the strike plate when door is closed.
- Mark the misalignment: rub lipstick/crayon on the bolt end, extend it, close door against the frame, open and check the strike plate to see exactly where it’s hitting.
- Do not file, bend, or move the strike plate or door frame, whatever the size of the misalignment. β Bolt does not line up with the strike plate: submit a maintenance request, the strike plate, door, or frame may need adjustment. If an exterior door cannot be secured, call 571-946-6021 right away.
πͺ Sliding Door Lock Issues
Hard to open or close
- Clean the track with a stiff brush, then wipe with a damp cloth.
- Lubricate track with silicone spray (not WD-40 or grease).
- Do not adjust the rollers or lift the door off its track. If the door is still hard to move after the track is clean, submit a maintenance request.
Lock not engaging
- Door fully closed in the track before engaging the lock?
- Look at the strike plate on the door frame. Is it loose or bent? Do not bend or adjust it. Report it.
- β Lock mechanism broken β submit a maintenance request. If the door cannot be secured, call 571-946-6021 right away. Any temporary measure (such as a cut dowel in the bottom track) must be easy to remove from inside so everyone can exit quickly in an emergency. Never block an exit.
πͺ Window Lock Issues
- Clean latch and frame with a damp cloth (dirt/paint buildup prevents engagement).
- Lubricate the latch with graphite or silicone spray.
- β Lock broken, cracked, or window won’t close fully β submit a maintenance request β a window that doesn’t lock is a security issue.
- β Window painted shut β do not force it. Submit a maintenance request.
π Garage Door Issues
Do not attempt to adjust or repair springs or cables yourself β they are under extreme tension and can cause serious injury. Do not force a door that is stuck, bent, or off its track.
Step 1: Check the Safety Sensors (resolves most garage door issues)
- Locate sensors β small devices mounted ~6 inches from the floor on each side of the door opening.
- Clean both sensor lenses with a soft, dry cloth β dust, spider webs, or moisture cause false readings.
- Check the sensor lights. On many models a steady light means aligned and a blinking light means misaligned, but the meaning varies by model, so check your opener manual.
- If your manual says blinking means misaligned, gently reposition the sensor by hand until both lights show the aligned pattern. Do not force it, and do not use tools on springs, cables, or the opener. β Fixed? You’re done.
- Check for obstructions (tools, boxes, broom) blocking the beam between sensors.
Step 2: Clear Physical Obstructions
- Remove any items in the full travel path of the door.
- Clear dirt and debris from track channels on both sides.
- Check the bottom rubber seal β if catching on uneven concrete, clean the floor surface beneath the door.
Step 3: Test the Opener and Remote
- Replace remote batteries β weak batteries are a common cause of unresponsive remotes.
- Test the wall button inside the garage. β Wall button works but remote doesn’t? Reprogram the remote per manufacturer instructions.
- Check power to the opener β plugged into ceiling outlet? Circuit breaker on?
- Sensors aligned and clean but door still won’t close
- Bent, dented, or misaligned door tracks
- Damaged or stuck door rollers
- Opener runs but door stops short of closing (limit switch β do not adjust yourself)
- Door unbalanced β falls quickly or rises on its own when lifted halfway
- Grinding, scraping, or loud popping during operation
- Spring or cable appears broken or loose β do not use the door at all.
When submitting, include: what the door does (stops at certain height, reverses, won’t move), whether sensor lights are blinking, and whether the issue affects the remote, wall button, or both.
π© Submit a Maintenance Request
Describe which door or window is affected (exact location), when the problem started, whether it is constant or on and off, what you tried and what happened, and whether the door can still be locked and secured. Add safe photos of the lock, strike plate, or frame. Please do not include door codes, key codes, or passwords. You can submit a request at any time, and right away if anything is unsafe or you are unsure.
Submit a Maintenance Request βOr contact us: π 571-946-6021 | π§ maintenance@novarpm.com
